Save Now BioGuard Power-Floc 32 oz

BioGuard Power-Floc 32 oz

BioGuard Power-Floc restores water sparkle by floccing (sinking to the bottom) suspended particles that may cause cloudy or dull water.  Power-Floc works overnight settling dead algae and suspended particles to the bottom of the pool so they can be vacuumed out to waste.

Product Features:

• Clears heavily clouded pools
• Restores water sparkle
• Highly concentrated
• Contains no metals
• Easy to use (no mixing)
• Works with all types of pools & filters
• Does not effect water balance

Directions:

• Shake well before using
• Clean skimmer, hair and lint pot, and backwash filter
• Adjust pH to 7.5 to 8.0 for best results
• Apply at a rate of 8 oz. per 10,000 gallons.  For extremely cloudy pools use double the normal dosage
• Remove any chemical products from skimmer basket

Usage with Sand Filters:

• With pump on and filter valve on Recirculate, pour Power-Floc slowly into skimmer
• For sand filters without a Recirculate option – clean filter and pour Power-Floc into a large pail of water (dilution of 8 oz. per 1 gallon of water) and apply solution evenly over the surface of the pool

Usage with Cartridge Filters:

• Remove cartridge filter element from filter tank
• Reassemble filter tank without filter element
• With pump on, pour Power-Floc slowly into skimmer
• Allow pump to circulate for 2 hours then turn pump off
• 12-24 hours later, slowly vacuum to waste  (Do not vacuum debris through filter)
• Backwash filter and clean filter with Strip Kwik then resume normal filter cycle
• Check pH and readjust, if needed, to 7.2-7.6