Dolphin Explorer E20 Robotic Swimming Pool Cleaner And Caddy Luxury

Dolphin Explorer E20 Robotic Swimming Pool Cleaner And Caddy

With the Dolphin Explorer E20, maintaining a clean and sparkling pool has never been easier. Its lightweight design makes it effortless to lift and maneuver, allowing for stress-free cleaning. The E20 is equipped with powerful scrubbing technology that effectively removes dirt and debris from the walls and floor of your pool. Its top-loading filter system is simple and easy to use, allowing you to remove debris without ever touching it. This saves you time and effort while ensuring maximum hygiene for your pool.

Additionally, the Dolphin Explorer E20 is an energy-efficient solution for your pool cleaning needs. It reduces the usage of water, chemicals, and energy with every cleaning cycle, making it an eco-friendly option. Its plug-and-play feature eliminates the need for complicated installation or setup procedures. Simply plug it in and drop it into your pool for a thorough and hassle-free cleaning.

Bundle Includes:

• Maytronics Dolphin Universal Caddy

Dolphin Explorer E20 Features:

Dolphin Explorer E20 Specifications:

• Weekly timer: Yes
• Automation mode: Yes
• Filter Type: Fine filter kit
• Filter access: Top access
• Cleaning coverage: Floor and walls
• Active brush: Yes
• Suction rate: 4,000 gph
• Cable length: 50 ft.
• Cleaner Weight: 15 lbs.

Dolphin Robotic Cleaners Basic Setup Guide

Cleaner Setup

• Unwind the floating cable and stretch it out completely so that it has no kinks
• Some models may arrive with plastic coverings on the brushes. Please Remove them before use

Power Supply

• Position the power supply so that it is in the approximate middle of the long side of the pool at a distance of 3.5m (12ft) from the edge of the pool
• Attach the floating cable to the power supply by inserting it with the notch on the connector (1) lined up with the groove in the socket on the power supply and turning clockwise
• Plug in the power supply and leave it in the OFF position

Place the Cleaner In The Pool

• Make sure that the floating cable is free of any obstructions
• Release the Pool Cleaner and let it sink to the floor of the pool
• To avoid kinks in the floating cable, place just enough cable in the water for the Pool Cleaner to reach the farthest corner of the pool
• Turn the power supply ON
• The Pool Cleaner will now operate until it has reached the end of the cleaning cycle

Removing The Pool Cleaner From The Pool

• Turn off and unplug the power supply
• Using the floating cable, pull the robot to the edge of the pool
• Grab the handle and remove the robot from the water – DO NOT PULL THE ROBOT OUT OF THE POOL USING THE CABLE
• Place the Pool Cleaner on the edge of the pool and let the water drain out

Helpful Hints

• When working, the Power Supply should be placed in the shade.
• Caution – Do not use an extension cable in any case whatsoever.
• If the Dolphin is fitted with combined or wonder brushes, gently squeeze the brushes until they are soaked with water.
• Release minimal required floating cable length to ensure proper pool coverage. Leave excess cable rolled outside the pool.
• After each cleaning cycle take the Dolphin out of the water to prevent accelerated wear and tear on its plastic parts.
• After each cleaning cycle wash the filter bag or cartridge. Clogged filter bags reduce scanning and cleaning efficiency. Once every two months, wash the filter bag in a washing machine, using a regular synthetic cycle.
• If your Dolphin is equipped with wonder brushes, rinse them in running water.
• For optimal operation, the water- temperature, pH, and chlorine levels should conform to the levels listed below:
  If any of these levels are different to those listed in the user instructions for your cleaner, please adhere to the levels noted here
• Temperature: 6℃ – 34℃ (43℉ – 93℉)
• pH level: 7.0-7.8
• Chlorine level: Max 4 ppm / NaCl 5000 ppm
• Once a week unplug the cable from the power supply, unwind the tangled portions of the cable, straighten it out and leave it in the sun for several hours.
• Store the pool cleaner in a shady place it’s Caddy. If you don’t have a caddy, place the pool cleaner upside down.

• Manufacturer: Maytronics, U.S.
• Maytronics, U.S. Item Number: 99996148-XP-CADDY
• UPC/GTIN: 00850015249426
• Condition: New
• Warranty:2 Years

Maytronics, U.S. Product Videos